How do you fix a single ply roof?

With single ply roofing, it is important to remember that the smallest gaps will allow water in and that will create a wider problem than the gap leading to water damage. Here is a brief step-by-step on patching a flat single ply roof. You’ll need a hot-air hand tool with an overlapping nozzle, a pressure roller, and a metal prod.

  • Make Your Patch: Using roofing membrane material, cut a patch out using a razor blade and place over the problem area with an overlap of 3 to 4 inches on all sides.
  • Clean: Next, clean the patch and the surface material, making sure they are free of any contaminants like debris, dust, or oil.
  • Weld: Using the overlapping nozzle on the hot-air tool, weld the patch to the surface.
  • Test: Once you have completed these steps, it is time to test the patch after a 10 to 15-minute cooling period. Using the metal prod and go along the edge to ensure you don’t have any gaps.
How do you fix a single ply roof

Single ply flat roof build-up is popular for many reasons, as we have discussed here

Single ply flat roof build-up is popular for many reasons, as we have discussed here. While there are some concerns and cons about the reliability of a flat roof system with a single ply roofing surface, overall, it is the best roofing available. Contact a local roofing expert for more information on the options available to you and pricing. Call (570) 561-9445 today for your single ply roofing needs in Wilkes-Barre, Dallas, and Scranton, PA.

What is the best material for a flat roof?

There are two types of arrangement of single-ply roofing components: warm deck and inverted warm deck. This means that there aremany combinations of system types and how they are attached to suit specific design conditions.

The different membrane types available for single-ply roofing are:

  • Chlorinated Polyethylene:  Made from chlorination that is heat welded or solvent welded and is congruent with bitumen.
  • Ethylene Propylene Diene Terpolymer: A material that is naturally flexible is made stable with added carbon black and is joined with tape bonding and a special primer. It can be joined with other types of adhesives and is harmonious with bitumen.
  • Flexible Polyolefin: A polyolefin family of materials that is heat-weldable and based upon polypropylene or polyethylene. Sometimes, it requires preparing the lap over preceding to welding. Generally apt with aged bitumen directly and the membranes are recycled full circle into the same type or another product.
  • Polyvinyl Chloride: The high-molecular-weight plasticizers make this a flexible PVC form that can be heat-welded or solvent welded depending on the product. This type of membranes and immediate contact with bitumen is normally not suitable unless a fitting weight of backing made of fleece is used to separate the two.
  • Thermoplastic Polyolefin Elastomer: A basic property of elastomers in the process of thermoplasts and shows a high endurance to UV and Ozone exposure. It is resistant to moisture and without. Laps are heat welded, bereft of fumes or smoke. Welding of seams is secured by a wide range of temperatures for various climatic conditions.
  • Vinyl Ethylene Terpolymer:  Combined with PVC, this material is made flexible with the blending of Ethylene Vinyl Acetate and can be heat-welded or solvent welded. It is fitting with bitumen.

Join us on Facebook